ONLY USE THE AP-120 WITH THE POR15 2K URETHANE PRODUCTS. PLEASE CLICK HERE FOR THE METAL PREP DESIGNED FOR USE WITH POR15 RUST PREVENTIVE PAINTS, POR15 TOP COATS AND POR15 TANK SEALERS
AP120 should always be used when painting directly onto aluminum and other reactive metals such as brass and copper. when used properly according to directions, it will insure a perfect bond every time. AP120 is not flammable and has no flashpoint, but protective gloves and goggles should be worn when using it.
Spray or brush AP120 onto metal to be painted and keep wet for two minutes, then wash off with water, dry surface thoroughly, and paint. Leaving AP 120 on aluminum for more than two (2) minutes may result in a slight darkening of the aluminum surface. Keep the AP120 bottle tightly closed when not in use.
Wear rubber or latex gloves when using. and follow instructions.