Using our combination kit, you can start with a rough casting and end with a mirror finish. Everything needed is included, except you and the drill. Kit contains 24 pieces and instructions.
Pre-polish and finish Aluminum Alloys, Brass, Copper, Steel, Iron and Stainless Steel!
The Polishing And Abrasive Kit contains :
|– 3 of 4″ x 1″ stitch mops|
– 450g Tube 80 coarse grit abrasive compound
– 450g Tube 150 or 180 medium grit abrasive compound
– 450g Tube 240 or 300 fine grit abrasive compound
– 4″ x 1″ Sisal mop
– 4″ x 1″ White stitch mop
– 4″ x 1″ G quality mop
– 100g Bar Grey compound
|– 100g Bar Green compound|
– 100g Bar Blue finishing compound
– Vienna Lime Powder
– 7 Small Polishing Felts
– 1 pair of gloves
– Steel Arbor
– Mini Arbor
– Dust Mask
Grades Available – There are several grades of abrasive compound available. The lower the grit number, the coarser the abrasive and the faster metal removal (giving a poorer finish). The higher the grit number, the finer the abrasive and the slower the metal removal but it provides a better finish. To take a metal from a poor condition to a finish ready to be polished, will take several greaseless compound processes. For example, you can start at a wheel coated with 120 grit greaseless, next 180 grit and finally the wheel coated with 240 grit.