Heavy Duty Spray Adhesive Aerosol (500 ml),

How to Use It

• Surface prep
  Make sure all surfaces are clean, dry, free of dust, grease, oil, loose paint or coatings. Roughen very smooth or glossy surfaces if needed to improve adhesion.

• Shake well before using to ensure adhesive components are properly mixed.

• Apply spray

  • Hold the can at a suitable distance (usually 20‑30 cm; check label) and apply an even coat.

  • Use the variable spray pattern to suit your job (wider for large area, narrow for precision).

• Tack‑off time
  Wait for the adhesive to become tacky (not wet) before joining surfaces. Don’t wait too long or too little.

• Press surfaces together firmly, applying even pressure. A roller might help distribute pressure and avoid bubbles or uneven bonding.

• Curing / Final strength
  Allow the adhesive to fully cure. Strength develops after bonding; avoid stressing the bond prematurely.

• Clean‑up
  Clean overspray, nozzle, etc. Solvent or recommended cleaner (check data sheet) should be used. Good ventilation is important.

The same adhesive used by manufacturers to bond trim fabrics, headlinings, floor carpets, and vinyls to foam, metal, wood, etc., is now available to you in convenient aerosol form.

Adjustable nozzle for wide or narrow spray patterns.