Tubing Notcher
21749£130.00
The FROST Tubing Notcher is designed to Notch Steel Tube. Round Tubing 2 inches in diameter or 2 1/2 inch Rectangular Tubes which means you can build anything from a Go Cart, Motorbike Frames, Roll Bars and many more. Use any Hand Drill to power the FROST Tubing Notcher. Use standard hole saws up to 2 inches in diameter. Adjust to your desired angle to make a neat butt weld.
Features at a glance:
- Compound angle adjustment up to 60 degrees
- Easy to read angle scales
- Join Round and Rectangular Tubes
- Holds up to 2″ diameter Round Tube or 2″ x 2-1/2″ Rectangular Tubes
- Uses standard hole saw blades (not included) up to 2 inch diameter
Made for FROST – BUILT TO LAST !
In stock
Steel tube is used for all kinds of fabrication work (motorbike frames, racing car chassis, roll bars, welding trolleys, go-karts, etc.) but can be tricky when you want to make neat butt welded T-joints. Frost Pipe Notcher is designed for use with any hand-held drill or drill press.
Uses standard hole saw blades (not included) up to 2 inch diameter.
| Weight | 3 kg |
|---|---|
| Brand |
Reviews
Only logged in customers who have purchased this product may leave a review.
Guest –
Pretty good tool, works well! Thicker sheet steel that I had imagined, so quite ‘chunky’. The scale sadly is a couple of degrees out and gets worse the more you rotate the tool towards 60* (circa 5-6* out). I have a Trend digital angle gauge, which I can set the angle from instead.
For note, I bought a deep Starrett hole saw but it restricts the angle you can cut, buy a ‘normal’ depth hole saw!