Male 7/16 X 24 UNF 3/16 Pipe
BPHU11£3.99
Top quality 100% brass brake, fuel and clutch fittings manufactured in the UK.
This specific size (7/16-24 for 3/16″ line) is very common in:
-
Classic American Cars: Often found on master cylinders or brake proportioning valves (General Motors, Ford, and Chrysler).
-
Brake Long Lines: Used when a standard 3/8-24 fitting is too small for a specific port on a brake component.
In stock
1. 7/16″ x 24 UNF (The Thread)
-
7/16″: This is the Major Diameter of the thread (the outside width of the threaded part).
-
24: This represents the Threads Per Inch (TPI).
-
UNF: This stands for Unified National Fine. It means the threads are “fine” rather than “coarse,” which is standard for high-pressure fluid connections to prevent leaks.
2. 3/16″ Pipe (The Tubing)
-
This indicates the fitting is designed to be used with 3/16-inch outside diameter (OD) tubing.
-
Note: While the thread is 7/16″, the hole through the center of the nut is sized to slide over a much thinner 3/16″ pipe.
| Weight | 0.5 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.