VHT NITE-SHADES RED

How to use it

Here are best practices and steps (based on user experiences):

1. Clean and prepare the lens — remove dirt, grease, wax. Prepping the surface helps adhesion.

2. Hold the can about 8–10 inches from the surface and apply thin, even coats in a sweeping motion.

3. Allow 30 minutes to 1 hour to dry to the touch; fully cure overnight.

4. Important Note: Once applied to a plastic lens, the coating “cannot be satisfactorily removed.” It’s essentially permanent.

VHT Nite-Shades^™ is a transparent tail light lens coating for creating a custom European styling. When applied to tail lights, fog lights or turn indicators, VHT Nite-Shades^™ appears black/red until they are lit, then the natural red/clear color appears. Warning: Once applied to a plastic lens, VHT Nite-Shades^™ cannot be satisfactorily removed. For off-road use only.