Multi-Purpose Hi-Build 2-in-1 Filler & Sandable Primer

How To Use

• Usage
  Body filler
• Prep
  Prepare surface by removing loose paint, dirt, rust, grease, wax etc. For best results use a grease and wax remover to clean the surface. Scuff/sand surface with 320-grit sandpaper, wet or dry. Wipe surface down again with grease and wax remover. Then let dry.
• Application
  To spray, hold can parallel and 8-10 inches from surface and use in an even, sweeping motion. To avoid runs and sags, apply in 2 light coats, followed by one medium wet coat allowing 10 minutes between each coat. If needed, sanding can be done wet or dry after 30 minutes with 600-grit sandpaper. When primer application is complete, wait 30 minutes before applying the appropriate Dupli-Color® topcoat. Can be handled in 1 hour. Covers approximately 12-14 square feet. After each use, invert can and spray until clear gas comes out.
• Application Conditions
  Use at temperatures between 60 °F (16°C) and 95°F (35°C) and when humidity is low