WINDSCREEN GLASS CHIP REPAIR KIT

ATTENTION

1. Make sure the damaged area is completely dry (water damage cannot be repaired).

2. The damaged area must be dry, clean and free of dirt.

3. Make sure there are cracks on the glass surface, drop the repair solution into the damaged glass, let the repair solution penetrate, wait for the repair solution to completely fill the cracks, and then cover with a hard film. Please do this step indoors or in a place without UV radiation, as UV radiation will cause premature curing and make the repair impossible.

4. After covering the curing film, transfer the damaged glass under sunlight or use a UV lamp to allow it to absorb UV rays and produce a focusing reaction for curing.

5. Restoration resin should normally be stored at 10°C ~ 25°C, such as in the case of low temperature may lead to solidification or crystallisation of the restoration resin, in the case of the lid is not open can be soaked in warm water, soaked in the shaking down.

6. For windscreens with cracks up to 12 inches/30 cm and rounded damage up to one inch in diameter, such as bullseyes, cracks, chips, starbursts, spiderwebs and other damage.