1lb Gray Primer Powder Coating Powder | Eastwood Hotcoat™
10301LB£22.49
Eastwood Hotcoat Powders are formulated from the finest quality materials and are a much more superior to liquid coatings. They provide Extremely Durable Finishes that are Chip, Chemical and Fuel Resistant. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Features at glance:
- Provides Extremely Durable Finish
- Contains no Environmentally Harmful Solvents
- 100% Virgin Powder
- Impact Resistant and Flexibility
- Good Chemical Resistance
- Durable enough for Under Bonnet Applications and Heat Resistant up to 250 degrees F
- Gray Primer
- High Gloss Level
- 400 Degrees Cure Temperature
- 20 Minutes Cure Time after Flow Out
- Polyester Powder Type
- Smooth Finish
- 16oz of Powder Provides Approximately 20-40 sqft of Coverage
Do The Job Right with Eastwood Powders!
Out of stock
JOIN WAITLISTFeatures at glance:
- Provides Extremely Durable Finish
- Contains no Environmentally Harmful Solvents
- 100% Virgin Powder
- Impact Resistant and Flexibility
- Good Chemical Resistance
- Durable enough for Under Bonnet Applications and Heat Resistant up to 250 degrees F
- Gray Primer
- High Gloss Level
- 400 Degrees Cure Temperature
- 20 Minutes Cure Time after Flow Out
- Polyester Powder Type
- Smooth Finish
- 16oz of Powder Provides Approximately 20-40 sqft of Coverage
Do The Job Right with Eastwood Powders!
Application:
CLEAN – Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT – Apply using Eastwood Hot Powder Coating Gun System
CURE – Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
| Weight | 0.454 kg |
|---|---|
| Brand | |
| Colour | Grey |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.