1lb Hot Rod Black Texture Powder Coating Powder | Eastwood Hotcoat™

Eastwood Hotcoat Powders are formulated from the finest quality materials and are a much more superior to liquid coatings. They provide Extremely Durable Finishes that are Chip, Chemical and Fuel Resistant. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

This textured polyester powder cures to a surface approximating 80 grit sand paper without the sharp peaks. Great for numerous muscle car and hot rod applications. Cure at 400 degrees F for 20 minutes after flow out occurs (transitions from a dry powder to a liquid look).

Features at glance: 

Features at glance: 

• Provides Extremely Durable Finish
• Contains no Environmentally Harmful Solvents
• 100% Virgin Powder
• Impact Resistant and Flexibility
• Good Chemical Resistance
• Durable enough for Under Bonnet Applications and Heat Resistant up to 250 degrees F
• Custom Matte Black
• Matte Finish
• Fine Texture
• 400 Degrees Cure Temperature
• 20 Minutes Cure Time after Flow Out
• Polyester Powder Type
• Polyester TGIC
• 16oz of Powder Provides Approximately 20-40 sqft of Coverage

Do The Job Right with Eastwood Powders!