Skin Zipper Air Hammer Driver Door Skinning Tool
50484£49.00
Use with your pneumatic hammer to skin doors quickly and easily.
Designed with steel shaft and self lubricating nylon head Form and crimp at 45 degree angles Inlcudes two slot sizes for thick or thin metal skins Head skins must be replaced after ten door treatments Two side slot widths are included for thick or thin sheet metal skins.
In stock
About Skin Zipper Air Hammer Driver Door Skinning Tool
1. Step One allows the technician to form the edge of the door skin to an initial 45 degree angle by holding the tool at a right angle to the door. No hammer and dolly work required here.
2. Step Two allows the technician to complete the final form by using the tool at a 45 degree angle. Two side slot widths are included for thick or thin sheet metal skins. When completed minimal finishing may be required on the corners and body lines. Skin Zipper reduces technician arm fatigue from hammer and dolly method as well as door refinishing time. The head will skin approximately 10 door skins and is easy to replace when it wears out. Labor/Material Savings: Saves the technician arm fatigue and up to 60 minutes of labor and assembly time by easily skinning the door with minimal refinish required to paint.
| Weight | 3 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.