Chassis Gloss Black Paint (1L)
P140£20.83
Our Chassis Black Paint is oil resistant with 1 litre covering approx. 12 square metres. Apply to a clean dry surface with a primer if applying to new or bare metal. It can be brushed on or sprayed, if thinned. If you require it to be thinned, we would recommend white spirit.
Gloss
Gloss paints have a highly reflective appearance imparting a slick, contemporary look. They are tough, durable and stain-resistant. Gloss paints are easier to clean than lower gloss paints
In stock
Protect your chassis with the classic finish.
For years, vehicle builders and restorers have relied on the quality and strength of Frost Chassis Black Paint to protect suspension, steering, axles and all other under body components that risk damage in every day use.
Our Chassis Black Paint is oil resistant with 1 litre covering approx. 12 square metres.
Apply to a clean dry surface with a primer if applying to new or bare metal. It can be brushed on or sprayed, if thinned. If you require it to be thinned, we would recommend white spirit, max 10% – 15%.
The Frost Chassis Black is a protective one-pack coating for use in tough demanding conditions. This quick drying synthetic enamel is designed to provide a gloss finish with durability without sacrificing economy. It is suitable for the full range of commercial vehicle chassis including buses, trucks and trailers.
It has a positive drying gives tack free time of 3 hours with the finish consisting of being a gloss finish that has excellent opacity.
| Weight | 1 kg |
|---|---|
| Brand | |
| Colour | Black |
Reviews
Only logged in customers who have purchased this product may leave a review.
Guest –
Best paint I have used for under car protection.
Guest –
Excellent the best chassis black paint I have used easy to get a good gloss even with a paint brush and the paint doesnt run easily… I use it on everything from Mini Subframes the Motorbike Frames looks great.
Guest –
This chassis paint is very good both when brushed and sprayed, giving good coverage and finish.
**CAUTION: this paint reacts (bubbles up) when used with the Frost own brand grey primer and satin black aerosols, as I found to my cost.**
Guest –
I was impressed with this paint, it was easy to use, did not leave any brushmarks in when applied, dried hard and is tough.
Even though it is inexpensive, it is very good, it is not thin and all carier, it has strong pigment and body to it, I painted a number of parts with it including a propshaft, pedal box parts and pedals and they look better than when they left the factory.
Also because it has good body to it, it does not require say 4 coats, I applied it over metal ready cured surface and zinc phosphate primer. One coat looked diamond hard. Two coats should be more than adequate, great product, highly recommend it.
Guest –
Used with primer on pickup chassis – excellent results.
Guest –
Fantastic paint really, flows out real nice but won’t run too easily. Dries deep black, rock hard and good gloss retention. Only one caution though it seems to have a fair bit of spirits in as it made my generic celly based primer lift so thin coat first !