VHT FlameProof Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT Flame Proof Coating will withstand temperatures up to 1093°C (2000°F) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.
Temperature: 704°C-1093°C (1300°F-2000°F)
Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads
Finish: Flat
Dry Time: Curing time required and can be done on or off vehicle (see below)
Curing FlameProof
VHT Flame Proof High Temperature Paint only attains its unique properties after correct curing (refer to instructions on the can).
On the Vehicle | Off the Vehicle |
– Paint must be completely dry before curing – Run at idle for 10 minutes – Cool for 20 minutes – Run at idle for 20 minutes – Cool for 20 minutes | – Paint must be completely dry before curing – Heat to 250°F (121°C) for 30 minutes – Cool for 30 minutes – Heat to 400°F (204°C) for 30 minutes – Cool for 30 minutes – Heat to 650°F (343°C ) for 30 minutes |
Caution: Do not exceed the temperature of the least heat tolerant component or the base metal
Aerosol: 11 oz (312g)
Paint Colours Available: Satin Clear, Cast Iron, Flat Black, Flat Silver, Flat White, Flat Red
Primer Colour: Flat White
Reviews
There are no reviews yet.