Serious Equipment for Auto Restorers Since 1905

FREE STANDARD DELIVERY ON ORDERS OVER £80 (Mainland England & Wales and parts of Scotland - exclusions apply)

POR15 Top Coat Silver Paint (Stirling Silver)

Product Code : POR15_Stirling_Silver

Be the first to review this product

POR15 Top Coat Silver (was Stirling Silver) may be applied directly to a clean prepped metal surface but, when used as a top coat over POR-15 Rust Preventive Coating it provides the toughest, most permanent protection against rust and corrosion ever developed. It won’t crack, chip or peel!

Availability: In stock

£ 23.99 £23.99

* Required Fields

Product Description


POR15 Top Coat Silver (was Stirling Silver) is a direct to metal coating designed to work incredibly well in all applications where there is a need to preserve substrates susceptible to corrosion.

Under exposure to sunlight and weather POR-15 TopCoat Silver (was StirlingSilver) has exceptional long term gloss and colour retention.

POR15 Top Coat can be applied directly to metal substrates, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long lasting protection.

POR-15 Top Coat has excellent adhesion and when used over POR15 Rust Preventive Paint the products create a system works to provide a permanent barrier to corrosion.

  • Non porous and will not crack, chip, or peel
  • Amazing scratch and abrasion resistance
  • Not sensitive to UV light
  • Can be applied over POR-15 or other paints.

Stirling Silver gives a high lustre silver finish.

Available in 2 sizes: US Pint (473ml) and US Quart cans (946ml).

See the How Do I Stop Rust Permanently with POR-15 Solutions? article in the Technical Articles section


Stir contents well, then dispense a portion into a separate container and seal can at once, keeping lid and grooves clean to avoid permanently sealing can shut.

Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken.

Best Dispensing Method: Use coffee scoop or pouring spout.

Do not put left-over paint back into can. Thin only with POR-15 Solvent, if necessary. Apply in thin, covering coats.


Surface to be coated should be dry and free of grease, oil, and other contaminants. Use POR15 Cleaner Degreaser (Marine Clean), diluted 1 part Cleaner Degreaser to 8 parts water to remove light contamination. Then rinse with water and allow to dry.


Repeat instructions above, then sand surface lightly with 240 grit sandpaper and wipe clean with dry tack cloth and paint.


Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper and apply one light to medium coat of POR-15 Self-Etching Primer.

Allow to cure for 30 Minutes at 68ºF (20ºC), or longer in cooler temperatures. Apply POR15 Top Coat as final finish. Depending on temperatures and humidity recoat at 3-12 hour intervals.

Spray Application: POR-15 Topcoat will need thinning using POR15 Solvent for most spray application 10-20%. Use 25-35 lbs.(172-240Kpa) pressure for normal semi-gloss.

Cleanup: Use POR-15 Solvent or lacquer thinner for cleanup, which must be done before the top coat dries; once dry it cannot be removed by solvent. POR15 Top Coat can take 3-4 days to reach maximum hardness or longer in temperatures below 55ºF 15ºC.


Write Your Own Review

You're reviewing: POR15 Top Coat Silver Paint (Stirling Silver)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
  • Reload captcha
  • Instructions

    Product Attachments

    View FilePOR15 Stirling Silver - Application    Size: (203.44 KB)


    Health & Safety

    Product Attachments

    View FilePOR15 Stirling Silver - MSDS    Size: (83 KB)

    You may also be interested in the following product(s)