Serious Equipment for Auto Restorers Since 1905

FREE STANDARD DELIVERY ON ORDERS OVER £80 (Mainland England & Wales and parts of Scotland - exclusions apply)

POR15 Detail Paint Aerosol - (425gm)

Product Code : POR_Detail_Paint_Aerosol

Be the first to review this product

POR 15 Detail Paint is designed to have a low sheen, will not yellow and restores parts to their original factory appearance.

Availability: In stock

£ 25.99 £25.99

* Required Fields

Product Description


POR 15 Detail Paint provides a professional grade finish that reproduces the  look of original parts.

POR 15 Detail Paint is designed to have a low sheen, will not yellow and restores parts to their original factory appearance.

POR 15 Detail Paint is formulated to provide maximum corrosion resistance and protect metal substrates against weather, sunlight, oil and water.

Ideal for master cylinder, steering box, transmission housings, hood springs, driveshaft, suspension components etc.

Temperature Resistance: 150C Continuous and 260C for periods

Cure Time:

To Touch: 5-10 minutes, depending on ambient temperature and relative humidity

To Recoat: 10-20 hours. Cure time varies with relative humidity, temperature and thickness of film

To Handle: 1 -2 Hours

Proper surface preparation is essential to achieve a high quality finish.

Surface Preparation:

Bare Metal: Using POR-15® Cleaner Degreaser clean all surfaces shall be free of loose rust, millscale and contaminants such as oil, grease, dirt, and salts. Before any surface preparation is attempted, oil and grease must be removed by employing SSPC-SP1 Solvent Cleaning. Use Near-White Blast Cleaning to POR-15 Detail Paint SSPC-SP10 to remove millscale, rust, and other contaminants and leave a roughened surface. You must use POR-15® Metal Prep first if you are painting on new steel, galvanized metal, aluminum, or any smooth metal surface. 

Previously Finished or Primed Surfaces: Using POR-15® Cleaner Degreaser ensure that the surface is clean, dry, and free from oil, grease, dirt, salts, and any other contaminants. All blistered and loose paint must be removed. Glossy surfaces should be roughened with 320 grit before recoating.

NOTE - PREVIOUSLY COATED SURFACES: Maintenance painting will frequently not permit complete removal of old coatings prior to repainting a particular surface. Please recognize that any surface preparation, short of removal of all old coatings, may compromise the service life of the new coating system. Check compatibility of previously painted surfaces using a test patch with the coating. 

Available Finishes: Stainless Steel, Cast Aluminium, Cast Iron


Write Your Own Review

You're reviewing: POR15 Detail Paint Aerosol - (425gm)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
  • Reload captcha
  • Instructions


    Health & Safety

    You may also be interested in the following product(s)