Evapo-Rust Super Safe Rust Remover 946ml (US Quart)

EVAPO-RUST is an amazing rust eliminator!

A product of extensive research, Evapo Rust rust remover is an environmentally-safe water-based product that removes rust in minutes.

It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition.

Available in US Quart (946ml), US Gallon (3.78L), 5 US Gallon (18.9L). One gallon de-rusts up to 300 lbs. of steel.

• Removes even heavy rust completely
• Non-toxic, non-corrosive, safe on skin
• No fumes or bad odours, non-flammable, no VOC's
• Biodegradable, water soluble
• Requires no special equipment
• Will not harm unrusted steel, safe on other metals
• Will not affect plastic, PVC, Viton and most paints

Read "FAQs About Evapo-Rust - The Super Safe Rust Remover" from Technical Article.

It's very easy to use EvapoRust to fix all of your rust problems. All it takes is 4 simple steps:

Step 1:

Pre-clean the item to remove oil and dirt.

In a container, pour a sufficient amount of EVAPO-RUST to completely cover the rusted object.

Step 2:

Rinse item and immerse the rusty object in the solution and leave it for 1-12 hours depending on the depth and age of rust - You can leave it overnight for extremely heavy rust.

Check progress periodically.

Step 3:

Once rust is removed, rinse item with water. If deep rust remains in pits, re-immerse item until all the rust is gone.

Un-rusted metal will not be affected.

NOTE: This stage is very important in getting the best results

Step 4:

To prevent re-rusting, simply dip the item into new Evapo-Rust solution. Then allow item to air dry. This will prevent rust for up to two weeks.

Evapo-Rust can be used over and over until performance drops off and the solution turns completely black. When ready to dispose of Evapo-Rust, only the iron content of the solution will dictate the disposal method. In most cases, it can be safely put down the drain.

To prevent rust from coming back, use a rust inhibitor after de-rusting.