EVAPO-RUST is an amazing rust eliminator!
A product of extensive research, Evapo Rust rust remover is an environmentally-safe water-based product that removes rust in minutes.
It’s so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition.
- Removes even heavy rust completely
- Non-toxic, non-corrosive, safe on skin
- No fumes or bad odours, non-flammable, no VOC’s
- Biodegradable, water soluble
- Requires no special equipment
- Will not harm unrusted steel, safe on other metals
- Will not affect plastic, PVC, Viton and most paints
Read “FAQs About Evapo-Rust – The Super Safe Rust Remover” from Technical Article.
It’s very easy to use EvapoRust to fix all of your rust problems. All it takes is 4 simple steps:
Pre-clean the item to remove oil and dirt.
In a container, pour a sufficient amount of EVAPO-RUST to completely cover the rusted object.
Rinse item and immerse the rusty object in the solution and leave it for 1-12 hours depending on the depth and age of rust – You can leave it overnight for extremely heavy rust.
Check progress periodically.
Once rust is removed, rinse item with water. If deep rust remains in pits, re-immerse item until all the rust is gone.
Un-rusted metal will not be affected.
NOTE: This stage is very important in getting the best results
To prevent re-rusting, simply dip the item into new Evapo-Rust solution. Then allow item to air dry. This will prevent rust for up to two weeks.
Evapo-Rust can be used over and over until performance drops off and the solution turns completely black. When ready to dispose of Evapo-Rust, only the iron content of the solution will dictate the disposal method. In most cases, it can be safely put down the drain.
To prevent rust from coming back, use a rust inhibitor after de-rusting.