Make payments easier with PayPal Credit.

Serious Equipment for Auto Restorers Since 1905

FREE STANDARD DELIVERY ON ORDERS OVER £80 (Mainland England & Wales and parts of Scotland - exclusions apply)

Eastwood DOWN TO METAL® Paint & Powder Stripper 3.78l

Product Code : 16029

Be the first to review this product

Strips most finishes from metal surfaces quickly and cleanly. Works great wet or dry.
Only 2 left

Availability: In stock

£ 71.99 £71.99

Product Description


Eastwood DOWN TO METAL® Stripper 3.78L is non-flammable and strips most finishes from metal surfaces quickly and cleanly. 

  • Strips acrylic, enamel, lacquer, polyurethane/urethane, waterborne and powder coatings from metal surfaces
  • Non-flammable formulation
  • Strip finish while still wet or allow to dry for quick, easy cleanup and disposal
  • Simple and direct brush-on application
  • Contains Methylene Chloride
  • Works great wet or dry.
  • When allowed to dry, it becomes a simple strip and discard process.

Eastwood DOWN TO METAL® Stripper is a fast, efficient and economical method of removing all types of finishes from metal surfaces of aircraft, automobiles, and trucks-wet or dry. This nonflammable stripper will remove acrylics, enamels, lacquers, polyurethanes/urethanes, and waterborne coatings while being non-corrosive to metal under normal exposure time. When allowed to dry, will not allow the old paint to re-adhere to the metal surface. This eliminates the undesirable and messy job of scraping wet paint remover from surfaces and the old method of washing wet stripper down the drain, which is hazardous to the environment. The dry mass, after scraped from the metal surface, can be swept from the floor and the biodegradable mass discarded in accordance with local, state, and federal laws.


Using a brush, apply stripper in one direction using thin coats since heavy or thick coats may cause old finish to run into unwanted areas. Thin coats work best for wet stripping while medium coats are recommended for dry stripping. On vertical surfaces it is recommended to start brushing from the bottom of the panel and work upwards.Should be used when the temperatures are between 65-90F and away from strong breezes and sunlight for best results.


Write Your Own Review

You're reviewing: Eastwood DOWN TO METAL® Paint & Powder Stripper 3.78l

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
  • Reload captcha
  • Instructions


    Health & Safety

    You may also be interested in the following product(s)