Many older interiors and components were finished with a wrinkle effect coat which produce texture finsh/ crinkle or crackle finish/ hammer finish - whatever you want to call!
Now you can reproduce the same finish in a few hours from an aerosol spray can. Great for early M.G. dashboards, Ferrari and Lotus cam covers, electrical components, old radio cabinets, trim pieces, gauges, etc
VHT High Temperature Wrinkle Plus leaves a distinctive custom crinkle finish that you both see and feel. The crackle finish is extremely durable, long lasting and chemical resistant. It is temperature resistant to 350°F (177°C) and is ideal for adding a touch of personal styling to almost any metal surface.
VHT Wrinkle Plus resists colour fading, grease, degreasers and severe weather conditions. This tough durable finish is extremely resistant to rust, corrosion, chipping and cracking.
Paint directly onto the bare metal to achieve the best effect (some customers have mentioned the paint will bond better with a coat of Self Etch Primer - but that might reduce the wrinkle finish)
Dries within 24 hrs of applying (does not wrinkle when cold, try to use in a warm atmosphere and when humidity is less than 60%)
Ideal for: Engine Accessory Brackets, Cam Covers, Valve Covers, Metal Dashboards, Glove Boxes, Starters, Door Panels, Shifters, Alternators, Firewalls amongst others.
1 aerosol can covers approximately 12-14 sq. feet.
- Great resultReview by Herc
I did clean the surface with degreaser, and I did keep the covers in the moderately warm kitchen, but other than that I just sprayed on three thick coats, five minutes apart as on the instructions. Five hours later I had a beautiful, consistent wrinkle.
The paint does dry very slowly, as they explain on the tin.
(Posted on 18/02/2014)
Write Your Own Review
Health & Safety