Tamar scissor lift is fully mobile car lift, use it when its needed then store it out of the way.
Safe and secure lifting ..... this CE approved equipment has a pneumatic ratchet safety system, operates from a 240V single phase supply with 24V controls, and is delivered fully assembled - just hook up the hydraulic power unit.
The Strongman Tamar has very flexible lifting arms to ensure the best possible lifting points to provide an exceptionally stable platform.
These lifts provide the ideal solution for any customer with restricted head height that may to work outside because the garage or workshop is too low to effectively raise a vehicle. Providing the base is concrete a Tamar mobile lift can be employed outside, it is easily moved into the yard.
They are not weatherproof but can be quickly deployed, one man can move the unit with the help of the motor-control unit which doubles up as the movement handle!
A drive-over, wheels free, lift this simple to use device has four flexible swing arms which can be fitted with rubber lifting blocks (available in various sizes).
At just 1m wide, with arms that can extend out to a maximum 1520mm, this lift can accommodate a whole range of vehicles up to a maximum capacity of 2800 kg and lift them to 1.2m.
Users may need to employ a couple of runners (scaffolding planks are ideal) either side to aid vehicle clearance when used as a drive over as ground clearance is 150mm.
Please click here to read the article "Truly Mobile? Highly Versatile!" about the Tamar.
This lift can be driven over, the lift arms extended and moved to locate the jacking points, or the lift can be pushed under a car from the side.
Tips: How difficult is it to move this lift?
The Tamar weighs in at 380kg but is surprisingly easy to move. The motor-control unit acts as the movement handle, the trick is to push the hadle down as low as possible, raising the front of the lift off the floor and then push, or pull the lift. Moving around the workshop or garage, on a smoth concrete floor, is easy to master.
The lift can be positioned for a car to drive over, bear in mind that for lower cars runners either side (possibly scaffolding planks) may be required - alternatively - if there is room the car can be left in position and the lift pushed under, at right angles, this is also effective to raise wider vehicles (those where the lifting points would be wider than 1.5m apart).
Should you be moving the lift outside to use in the yard then help in the form of somebody assisting with a strop to pull at one end will ensure easy passage to your chosen location!
|LIFT CAPACITY||2800 kg|
|MAX LIFT HEIGHT||1200 mm|
|MIN CLEARANCE||125 mm|
|MOTOR||240V Single Ø|
|SUPPLY NEEDED||C or D - 16A|
|CONCRETE SPEC||6’’ - 3000 PSI|
Write Your Own Review
Health & Safety