POR15 Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal. Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and is not sensitive to UV light. Follow directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!
Directions for Use:
For best results, when applying over bare metal, first prep your job with POR-15 Metal Ready. Keep wet for 15 minutes, then wash off thoroughly with water and dry. Stir contents of can well, then apply Metal Mask with a foam brush. Try to avoid painting back and forth. Apply in thin, covering coats, using single, steady strokes to avoid flooding your job with too much paint, which could cause it to run and streak. Continue to stir Metal Mask so that metallic pigments remain in solution as you paint. Allow 3 or 4 days for Metal Mask to reach maximum hardness.
Use 25 - 30 lbs(170-210Kpa). pressure for normal gloss. Use only POR-15 Solvent for thinning.
Precautions: Avoid skin contact. Remove from skin at once to avoid temporary staining. Use of protective gloves and ventilating equipment is recommended.
Also Available in 236ml Can.
Write Your Own Review
Health & Safety