Need Help? Call +44(0) 1706 658 619
Free Delivery Frost Auto Local Shop Rochdale  catalogue request frost restoration Google Trusted Store
Click collect

POR15 Top Coat Chassis Coat Black 946ml (US Quart)

Product Code : P505

Be the first to review this product

POR-15 Chassis Coat Black may be applied directly to a clean prepped metal surface but, when used as a top coat over POR-15 Rust Preventive Coating it provides the toughest, most permanent protection against rust and corrosion ever developed. It won’t crack, chip or peel!

Availability: Out of stock

£ 34 £34.00

Product Description

Details

POR15 Top Coat in Chassis Black (was Chassis Coat Black)is a direct to metal coating designed to work incredibly well in all applications where there is a need to preserve substrates susceptible to corrosion

Chassis Coat Black paint has a smooth, satiny semi-gloss finish, and is probably more correct as original for underhood and chassis components for cars produced in the USA from the early 1950's to today.

POR15 Top Coat can be applied directly to metal substrates, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long lasting protection.

POR-15 Top Coat has excellent adhesion and when used over POR15 Rust Preventive Paint the products create a system works to provide a permanent barrier to corrosion.

  • Non porous and will not crack, chip, or peel
  • Amazing scratch and abrasion resistance
  • Not sensitive to UV light
  • Can be applied over POR-15 or other paints.

Availble in 3 sizes: 368g (Aerosol), 437ml (US Pint) and 946ml (US Quart).

See the How Do I Stop Rust Permanently with POR-15 Solutions? article in the Technical Articles section.

DIRECTION

Stir contents well, then dispense a portion into a separate container and seal can at once, keeping lid and grooves clean to avoid permanently sealing can shut.

Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken.

Best Dispensing Method: Use coffee scoop or pouring spout.

Do not put left-over paint back into can. Thin only with POR-15 Solvent, if necessary. Apply in thin, covering coats.

SURFACE PREPARATION

Surface to be coated should be dry and free of grease, oil, and other contaminants. Use POR15 Cleaner Degreaser (Marine Clean), diluted 1 part Cleaner Degreaser to 8 parts water to remove light contamination. Then rinse with water and allow to dry.

APPLYING CHASSISCOAT OVER OTHER PRIMERS

Repeat instructions above, then sand surface lightly with 240 grit sandpaper and wipe clean with dry tack cloth and paint.

TO PAINT OVER A CURED POR-15 SURFACE

Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper and apply one light to medium coat of POR-15 Self-Etching Primer.

Allow to cure for 30 Minutes at 68ºF (20ºC), or longer in cooler temperatures. Apply POR15 Top Coat as final finish. Depending on temperatures and humidity recoat at 3-12 hour intervals.

Spray Application: POR-15 Topcoat will need thinning using POR15 Solvent for most spray application 10-20%. Use 25-35 lbs.(172-240Kpa) pressure for normal semi-gloss.

Cleanup: Use POR-15 Solvent or lacquer thinner for cleanup, which must be done before the top coat dries; once dry it cannot be removed by solvent. POR15 Top Coat can take 3-4 days to reach maximum hardness or longer in temperatures below 55ºF 15ºC.

Reviews

Write Your Own Review

You're reviewing: POR15 Top Coat Chassis Coat Black 946ml (US Quart)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
  • Reload captcha
  • Instructions

    Video

    Health & Safety

    Product Attachments

    View FilePOR15 Chassis Coat Black - MSDS    Size: (55.26 KB)

    You may also be interested in the following product(s)

    FROST uses cookies to ensure that we give you the best experience on our website. By using our services, you agree to our Cookie Use. Find out more here.
    x