Millers Oils Classic Running In (5 litres) Oil can be used with all Classic & Vintage Engines (up to 500 miles).
SAE 30 running in oil for classic engines. Highest quality solvent refined mineral base stocks treated with specially designed additive system.
Use for initial running in of re-built engines. Formulated for running in on the road. Can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine.
Suitable for limited road use (500 miles) after which it should be replaced with the appropriate Millers Classic Engine Oil.
High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
Provides full protection to highly stressed valve gear and associated components whilst allowing piston rings to bed in against the bore.
Good running in will optimise the performance and fuel efficiency of a reconditioned engine.
Very low leak down (4%) obtained after thorough running in process.
Write Your Own Review
Health & Safety