Need Help? Call +44(0) 1706 658 619
Free Delivery Frost Auto Local Shop Rochdale  catalogue request frost restoration Google Trusted Store

Interior Liquid Plastic Paint Soft Leather/Vinyl Coat (1L)

Product Code : U225

Be the first to review this product

With Interior Coat Paint you can breathe new life into scratched, scored or chipped surfaces, matching the original colour or even changing it.

Availability: In stock

£ 29.99 £29.99

* Required Fields

Product Description

Details

Remove dirt, grease and silicones from vinyl or leather surfaces with Interior clean. Paint or lacquer with Interior Prep.

The unique coating actually penetrates the surface and changes the pigmentation. When finished the grain of vinyl or leather is intact, it does not crack or peel. Afterwards, leather can be fed with hide food and will retain its natural aroma.

Preparation is simple:

- Clean the interior by removing dirt, grease and silicones with Plastikleen.

- Dampen a clean, soft, lint free cloth with Plasticprep and wipe over the surface to be treated to remove all traces of any other previously applied products which might impair the bonding of the liquid plastic. This should leave the surface slightly tacky.

Do not touch the surface again at the stage as it may become contaminated again.

- If treating semi-rigid, polythene and polypropylene plastics it is essential to use Adhesionaid before applying Liquid Plastic.

Allow Plastic prep to dry before spraying. Shake the can thoroughly and apply a thin coat of Adhesion aid.

Allow Adhesionaid to dry (12 minutes at 20 degree C) before applying Liquid Plastic.

- Spray Interior Coat Liquid Plastic for permanent, colourfast and weatherproof transformation.

Check a small test area first before applying. After 15 minutes test by placing sticky tape on applied area. Upon removal there should be no liquid Plastic on tape.

Apply in mist coats only, allowing 5-10 minutes flash off time between coats.

Depending on the original colour between 2 and 3 evenly applied coats should cover the substrate.

Do no attempt to cover in one coat or apply in thick coats.

Liquid Plastic can be handled after 10-15 minutes and fully cures in 16-20 hours depending on the ambient temperature and humidity. Heat will reduce the drying times.

High humidity or damp conditions can lead to poor adhesion and/or a blooming effect.

Interior Coat available in 6 colours and 2 different sizes. 6 colours available: Black, Biscuit, Off White, Light Grey, Navy Blue, Red and White.

Reviews

Write Your Own Review

You're reviewing: Interior Liquid Plastic Paint Soft Leather/Vinyl Coat (1L)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
  • Reload captcha
  • Instructions

    Product Attachments

    View FileCar Interior Restoration‎    Size: (197.51 KB)

    Bradleys Liquid Plastic is ideal for restoring or completely changing the colour of vinyls, leathers and most plastics. Unlike traditional paint products Bradleys Liquid Plastic penetrates the surface of the substrate leaving it in perfect relief. If applied correctly it will not crack, flake or peel off.

    Available in any colour (we can match to customer samples) and in gloss, satin, matt and textured finishes. Liquid Plastic can be used for revitalising existing plastics and vinyls by bringing its appearance back to original or completely changing its colour.

    Liquid Plastic is pre-thinned, single pack and comes ready to spray. It contains no CFC’s, Cadmium, Zinc, Formaldehyde or Isocyanates, and it gives a non toxic finish.

    Warnings and Cautions

    • Liquid Plastic contains Petroleum Distillates
    • Bradleys recommended the use of suitable protective clothing
    • Do not breathe spray
    • Keep away from sources of ignition – no smoking whilst using
    • Use only in well ventilated areas
    • Avoid contact with skin
    • Keep out of reach of children
    • Keep away from food, drink and animal foodstuffs
    • Use only as directed on containers

    APPLICATION GUIDE

    It is essential to clean any item being recoloured.

    Plastikleen

    Ideal for all plastic, leather and vinyl surfaces

    Removes dirt, grease and silicones

    Do not apply to cloth or nylon upholstery

    Dilute 1 part with 2 parts water. Apply with soft brush and rub firmly

    Wipe soapy residue with damp cloth and dry with soft cloth

    Plasticprep

    Ideal for all plastic, leather and vinyl surfaces

    Clean surface to be treated with plastikleen and dry thoroughly to remove all traces of moisture

    Dampen a clean, soft, lint free cloth with plasticprep and wipe over the surface to be treated to remove all traces of any other previously applied products which might impair the bonding of the liquid plastic. This should leave the surface slightly tacky.

    Do not touch the surface again at the stage as it may become contaminated again.

    Allow to dry and then apply Liquid Plastic.

    Caution: Plasticprep can soften some plastics.

    Adhesionaid

    If treating semi-rigid, polythene and polypropylene plastics it is essential to use Adhesionaid before applying Liquid Plastic.

    Allow Plasticprep to dry before spraying. Shake the can thoroughly and apply a thin coat of Adhesionaid.

    Allow Adhesionaid to dry (12 minutes at 20 degree C) before applying Liquid Plastic.

    Liquid Plastic

    Clean the surface thoroughly with plastikleen and plasticprep. Allow Plasticprep to dry thoroughly.

    If treating a polypropylene based material it is essential to use Adhesionaid before applying Liquid Plastic (see Adhesionaid instructions).

    Shake and stir the contents of the can thoroughly.

    Check colour before application. Check a small test area first before applying.

    After 15 minutes test by placing sticky tape on applied area. Upon removal there should be no liquid Plastic on tape.

    Apply in mist coats only, allowing 5-10 minutes flash off time between coats.

    Depending on the original colour between 2 and 3 evenly applied coats should cover the substrate.

    Do no attempt to cover in one coat or apply in thick coats.

    Liquid Plastic can be handled after 10-15 minutes and fully cures in 16-20 hours depending on the ambient temperature and humidity. Heat will reduce the drying times.

    High humidity or damp conditions can lead to poor adhesion and/or a blooming effect.

    Video

    Health & Safety

    You may also be interested in the following product(s)

    FROST uses cookies to ensure that we give you the best experience on our website. By using our services, you agree to our Cookie Use. Find out more here.
    x