Using our combination kit, you can start with a rough casting and end with a mirror finish. Everything needed is included, except you and the drill. Kit contains 24 pieces and instructions.
Pre-polish and finish Aluminum Alloys, Brass, Copper, Steel, Iron and Stainless Steel!
The Polishing And Abrasive Kit contains :
- 3 of 4" x 1" stitch mops
- 450g Tube 80 coarse grit abrasive compound
- 450g Tube 150 or 180 medium grit abrasive compound
- 450g Tube 240 or 300 fine grit abrasive compound
- 4" x 1" Sisal mop
- 4" x 1" White stitch mop
- 4" x 1" G quality mop
- 100g Bar Grey compound
- 100g Bar Green compound
- 100g Bar Blue finishing compound
- Vienna Lime Powder
- 7 Small Polishing Felts
- 1 pair of gloves
- Steel Arbor
- Mini Arbor
- Dust Mask
Grades Available - There are several grades of abrasive compound available. The lower the grit number, the coarser the abrasive and the faster metal removal (giving a poorer finish). The higher the grit number, the finer the abrasive and the slower the metal removal but it provides a better finish. To take a metal from a poor condition to a finish ready to be polished, will take several greaseless compound processes. For example, you can start at a wheel coated with 120 grit greaseless, next 180 grit and finally the wheel coated with 240 grit.
Write Your Own Review
Health & Safety