Hotcoat Powder Coating (1 kilo) for HotCoat Powder Coating Gun.
Powder coating allows you to coat and cure metal parts in less than an hour, and provides an extremely durable finish that is dent and chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, and contains no environmentally harmful solvents.
- Eastwood HotCoat Powder Coating Colour Sample Kit
- Eastwood Extreme Chrome Bonded Hotcoat Powder Coating (8oz)
- Strip and Clean your metal part before coating
- Coat the entire part – you can’t overcoat
- Cure your part in an electrical oven for about 20 minutes
• Professional results
• Quick colour changes
• Durable finish
• Easy set-up, easy to use, and easy to clean-up
• Excellent fluidization of powders
Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint and does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven and bake for 15 minutes. Easy set-up, easy to use, and easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply and a dedicated electric oven.
Colours Available: Blue- Jet Black - Orange - Brown - Yellow - Green - Bright Red - Silver - White - Graphite Black
(NOTE: Exact colours are difficult to show, due to display settings)
Blue-5012, Bright Red-3001, Brown-8011, Graphite Black-9011, Green-6018, Jet Black- 9005, Orange-2009, Silver 9006, White 9016, Yellow 1021
Write Your Own Review
Health & Safety