|
 Wheeling
and Raising Machines:
Type 495
Bench mounted machine as standard
Suitable for wheeling and raising light gauge steel and aluminium panels,
removing dents, smoothing hammer marks, crushing welds
Pressure is applied by adjusting the bottom wheel. The top wheel is fitted
on to the horizontal shaft, which runs in ball bearings in the main
frames.
Two standard wheels supplied B and F
Additional bolt on legs are available
Technical data:
Reach: 535mm
Top roll dimensions: 140mm x 40mm
Lower roll dimensions: 70 x 40mm
Height of nip from floor: 1130mm
Nett weight: 60kg
Gross weight: 85kg
Case size: 88 x 72 x 30cm (without legs), 145 x 80 x 30cm (with legs)
|
 Type 373/24 and 373/42
Capacity 1.6mm Mild Steel, Aluminium 3.2mm
Massive cast frame
Easy top adjustment feature
Quick
release lever to lower roller, enabling work to be removed and reinserted
without change of pressure
Top and bottom wheels swivel in order to allow workpiece to run into or
parallel with gap
Wheels fitted with large size ball bearings, which incorporate dust
shields, machine includes top wheel and three lower wheels
Three standard wheels supplied A1, C and F
Suitable for forming Steel, Copper and Aluminium
Technical data:
373/24
Reach: 600mm
Top roll dimensions: 146 x 48mm
Lower roll dimensions: 82.5 x 48mm
Height of nip from floor: 965mm
Nett weight: 165kg
Gross weight: 200kg
Case size: 104 x 97 x 30cm
|
|
373/24 Price:
Additional lower wheels |
£ - unavailable
at present-
£ 120.00 (+ VAT) |
373/42
Reach: 1070mm
Top roll dimensions: 197 x 62mm
Lower roll dimensions: 95 x 75cm
Height of nip from floor: 1030mm
Nett weight: 388kg
Gross weight: 462kg
Case size: 150 x 150 x 40cm
|
|
373/42 Price:
Additional lower wheels |
£ 3,670.00 (+ VAT)
£ 202.00 (+ VAT) |
|