SHAKE WELL BEFORE USE
Frost Satin Black Paint is a fast drying acrylic paint, with exceptionally high coverage leaving a satin finish. Suitable for most applications.
For better performance, try our new Frost High Performance Frame & Chassis Satin Black Paint Aerosol.
Prepare the primed area to be treated, ensuring freedom from dust, grime, greases, oils, etc, with Frost Panel Cleaner (C110) and allow to dry.
If necessary, the surface may be flattened by abrading the surface lightly, using 1200 grade wet and dry abrasive paper, and solvent treated as described above to remove any dust.
Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use.
Apply sparingly from a distance of 20 - 25cm.
Apply typically 2 to 3 light coats as necessary to achieve total and even coverage leaving 10 - 15 minutes between each application.
Allow to fully harden for at least 24 hours after application of final acrylic finish coating.
On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage. .
FROST SATIN BLACK is a fast drying acrylic paint offering a convenient alternative to conventional spray equipment.
It is suitable for most applications in the automotive and general industrial areas.
It is also compatible with most other paint systems.
It is recommended that a good quality undercoat is used with this paint.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 deg. C.
Do not pierce or burn, even after use.
Do not spray on a nacked flame or any incandescent material.
MADE IN UK
- Very goodReview by Dave
**CAUTION, do not use in conjunction with the Frost own brand Chassis Paint, they react** (Posted on 01/09/2013)
Write Your Own Review
Health & Safety
You may also be interested in the following product(s)
Regular Price: £65.50
Special Price £49.99