Quick, easy and safe removal of undercoats.
Eastwood Under Gone Undercoating Remover aerosol works by loosening the bond of the undercoating to the base metal and allows you to scrape it off, leaves a paint ready surface.
Shake can thoroughly before, and periodically during, use. Spray-apply to a 12" square area and allow to penetrate for 30 seconds to 2 minutes. Then scrape loosened undercoating from surface. Reapply if necessary to remove heavy applications.
NOTE: Will remove paint! Rinse painted surfaces immediately with water to avoid damage. Do not use for removal of baked-on, epoxy or urethane coatings.
Q: Exactly what does under gone remove, what accessories are necessary, any additives needed.
A: Undergone is meant to be a solvent for most all rubberised undercoatings, aided with the help of a heat gun. But it starts to soften the product to be scraped off.
Write Your Own Review
Health & Safety