Eastwood TIG 200 AC/DC Welder

This item will only be delivered to GB mainland, Northern Ireland and UK Isles.

3 year warranty (subject to conditions).
Get industrial TIG features at a DIY price with the Eastwood TIG Welder ! The Eastwood 200-amp TIG Welder features an AC/DC switch that gives professional quality welding on aluminium, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 6mm thick. With a 4.26m torch and a 3m earth cable, you'll be able to get into any space. Eastwood TIG 200 Welder has pre- and post-flow adjustment knobs to protect your weld and torch and has infinitely adjustable foot pedal to control amperage so you can get going quickly. Thumb control overrides the foot pedal for out-of-position welding, or when bench welding is not an option. SPECIFICATIONS
- Operates on 240v, 30-amp ring-main.
- 6mm thick welding capacity (1/4")
- High-frequency start for precise arc control
- Square-wave inverter for accurate aluminium welding
- Duty cycle: 45% at 150 amps
- "WP-17"-type torch accepts common cups and collets, up to 2.6mm electrodes (1/8"). Contents of UK package: - TIG 200 Welder Unit - Shielding Gas Regulator - Shielding Gas Hose - Ground Cable with Clamp, 10' - TIG Torch (17 Series), 14' - Foot Pedal for Amperage Control - Handheld Shield - Hammer/Brush - #7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16") - Long Back Cap, Short Back Cap - 3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet - Thoriated Tungsten (2.0mm Red) - Instruction Manual Want to know what is TIG welding ? See the article on the Frost blog, click here...