***Clearance. When it's gone it's gone!***
Eastwood's award-winning Aerosol-Injected System directs a focused blast of cleaner or lubricant to penetrate deep into hard-to-reach places
Eastwood Aerosol-Injected Cleaner System was the 2011 Winner of Popular Mechanic's™ Magazine Editor's Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can's nozzle that creates a tight seal to force the cleaner or lubricant deep into the tool or tubing, without blowback. With 360-degree valves, you can even spray upside down! Ideal for cleaning or lubricating anything around the car, shop and home.
Aerosol-Injected Cleaner cleans: Paint guns, Brake, transmission and fuel lines, Fuel injectors, Removes paint, grease, machining oils and other contaminants
Aerosol-Injected Lubricator cleans: Air tools; speedometer cables; locks and mechanisms; machinery and shop equipment; also use for fogging/engine storage
1. Test-fit the injector tip into area to be lubricated or cleaned. Make sure it fits snugly into place.
2. Put on eye protection and point nozzle away from your face.
3. Insert nozzle tip into orifice and gently push the can to deliver the lubricant or cleaner. If fogging an engine, remove spark plugs and insert tip into cylinder and apply lubricant. Replace spark plugs when complete. Always store with the extension tube removed to prevent accidental discharge.
Write Your Own Review
Health & Safety