Need Help? Call +44(0) 1706 658 619
Free Delivery Frost Auto Local Shop Rochdale  catalogue request frost restoration Google Trusted Store

FAQs about Frost Liquid Wrap Rubberised Paint

 

I. Suggested Quantity*:

* This is the minimum quantity required for a complete car. This may need to be increased, depending on:

- Vehicle size

- Vehicle colour

- Spraying equipment & technique. 

Standard amount of layers are “1 light, thin wet coat as the first bonding layer, then followed by 6 or more heavier wet coats”.  It will take 2 to 3 coats before the paint cover will start to show.

Liquid Wrap is ready for spraying - No thinner required as it’s already mixed in perfectly. The light texture of this rubber coating will give you a fine, smooth finish that is similar with vinyl wrap.

1/ SMALL VEHICLE (e.g. Motorcycles, Quad bikes, Small cars like Mini, Swift, etc.)

 

Liquid Wrap Colour

Vehicle Colour

 

Normal Matt Colours

(Red, Green, Flat Aluminium, etc.)

Fluorescent Neon Colours

Black & Gun Metal Grey

White

Base Coat Not Required

Colour Coat 10 litres

Base Coat Not Required

Colour Coat 5 litres

Base Coat Not Required

Colour Coat 10 litres

Light Colours (Red, Blue, Green, Silver, etc.)

Base Coat 5 litre

Colour Coat 10 litres

Base Coat 5 litre

Colour Coat 10 litres

Base Coat Not Required

Colour Coat 10 litres

Dark Colours (Black, Dark Blue, Dark Grey, etc.)

Base Coat 5 litre

Colour Coat 10 litres

Base Coat 5 litre

Colour Coat 10 litres

Base Coat Not Required

Colour Coat 10 litres

 

2/ MEDIUM CAR (e.g. BMW 3)

 

Liquid Wrap Colour

Vehicle Colour

 

Normal Matt Colours

(Red, Green, Flat Aluminium, etc.)

Fluorescent Neon Colours

Black & Gun Metal Grey

White

Base Coat Not Required

Colour Coat 15 litres

Base Coat Not Required

Colour Coat 15 litres

Base Coat Not Required

Colour Coat 15 litres

Light Colours (Red, Blue, Green, Silver, etc.)

Base Coat 5 - 10 litre

Colour Coat 15 litres

Base Coat 5 - 10 litre

Colour Coat 15 litres

Base Coat Not Required

Colour Coat 15 litres

Dark Colours (Black, Dark Blue, Dark Grey, etc.)

Base Coat 5 - 10 litre

Colour Coat 15 litres

Base Coat 5 - 10 litre

Colour Coat 15 litres

Base Coat Not Required

Colour Coat 15 litres

 

3/ LARGE CAR (e.g. Audi A8, 4X4)

 

Liquid Wrap Colour

Vehicle Colour

 

Normal Matt Colours

(Red, Green, Flat Aluminium, etc.)

Fluorescent Neon Colours

Black & Gun Metal Grey

White

Base Coat Not Required

Colour Coat 15 litres

Base Coat Not Required

Colour Coat 15 litres

Base Coat Not Required

Colour Coat 20 litres

Light Colours (Red, Blue, Green, Silver, etc.)

Base Coat 5 - 10 litre

Colour Coat 15 litres

Base Coat 5 - 10 litre

Colour Coat 15 - 20 litres

Base Coat Not Required

Colour Coat 20 litres

Dark Colours (Black, Dark Blue, Dark Grey, etc.)

Base Coat 5 - 10 litre

Colour Coat 15 - 20 litres

Base Coat 5 - 10 litre

Colour Coat 15 – 20 litres

Base Coat Not Required

Colour Coat 20 litres

 

4/ LIQUID WRAP WHEELS

You will need about 6-8 coats per wheel. One aerosol can should cover 1 wheel. (up to a 17” dia wheel)

As with spraying the vehicle, the quantity required will depend on the colour of your wheel. If you go from a Dark colour to a Light one, you will need a Base Coat.

1 Aerosol Base Coat will provide the base for 4 wheels.

 

II. What type of surface can be applied on?

You can apply Liqui Wrap on most hard surfaces – e.g Metal, Plastic, Wood, etc. We don’t recommend its application on soft or fabric surfaces.

It is essential that the surface that you want to spray should be well prepared: cleaned properly, in good condition, without grease etc. Otherwise, the finish will not be as good as expected.

 

III. What is Clear colour?

This is Clear Matt finish. This can be used as a top coat to protect the surface from fading (especially with the Flat Aluminium colour).

It gives a silky feel finish and will protect from dirt that is hard to wash off. You can apply this on a small area (such as the front of the car) to give your vehicle protection from small stone chips.

 

IV. What maximum surface temperature that the cured product will tolerate?

The heat temperature tolerance of fully cured Liquid Wrap is 150 deg. C, as tested in an industrial oven.

 

FROST uses cookies to ensure that we give you the best experience on our website. By using our services, you agree to our Cookie Use. Find out more here.
x